A&E NYC Plumbing https://www.topplumbernyc.com NYC 24 HR Plumbing Service Mon, 13 Feb 2023 18:54:00 +0000 en-US hourly 1 https://wordpress.org/?v=6.7.1 https://www.topplumbernyc.com/wp-content/uploads/2020/05/cropped-android-chrome-512x512-1-32x32.png A&E NYC Plumbing https://www.topplumbernyc.com 32 32 The New Generation Of Water Heaters https://www.topplumbernyc.com/the-new-generation-of-water-heaters/ Mon, 13 Feb 2023 18:52:39 +0000 https://www.topplumbernyc.com/?p=20593 Read more]]>
Residential water heaters have evolved significantly over the last decade. Modern water heaters feature state-of-the-art technology, delivering a cost-efficient operation. Older models were oftentimes referred to as “energy-hogging appliances.” Fortunately, this is no longer the case with the soaring cost of residential electricity. A&E NYC Plumbing The right water heater will offer maximum energy efficiency, quick hot water generation, and optimum hot water storage. Tankless Water Heater –  A hot water heater without a tank, is this true? Yes, modern residential water heaters are available without a storage tank. The unit features an on-demand operation that generates water almost immediately when the tap is switched on. The tankless water heater, also known as a demand-type water heater, is ideal for small apartments, flats, condominiums, mobile homes, RVs, and duplexes. After years of advanced research, tankless units are now being installed in commercial settings. Medical centers, schools, bookshops, government entities, supermarkets, and big-box stores are turning to tankless water heaters. It is questionable if tankless water heaters are ready for industrial settings. Manufacturers are continuously researching new technologies to make their tankless models more efficient for industrial businesses. Heat Pump Water Heater – The heat pump water heater is slated as one of the highest efficiency models to date. The traditional unit works by generating heat to provide hot water. The heat pump water heater does quite the opposite by moving heat from place to place to generate hot water. Consumers have reported slight decreases in their energy usage after the first month of operation. Conventional Storage Water Heater – The model features an onboard tank for hot water storage. Before a conventional storage water heater is installed in a hot, a plumber must determine the average monthly usage. Modern homes utilize an average of 63 gallons (240 liters) of hot water per day. Monthly usage of hot water would be less than 1,900 gallons (7,192 liters). A conventional storage water heater produces adequate hot water for a family of four. When family members and friends are visiting, they may not be able to keep up. Solar Water Heater – The unit utilizes heat from the sun to generate hot water. Consumers in the process of building green homes should definitely consider solar water heaters. Reducing the carbon footprint could not be easier than with a solar-powered water heater. Indirect Water Heater – The unit operates on a residential space heating system. Indirect water heaters are more commonly known as tankless coil water heaters.

Factors To Consider When Shopping For A Modern Water Heater

  • Price – The tankless unit is one of the most expensive types of water heater. The conventional storage water heater costs between $500 and $3,500 for multi-story homes. The tankless solar water heater can cost as much as $13,000 or as little as $1,700. It is easy to see why consumers choose the conventional unit more often than the tankless unit.
  • Size – A licensed plumber can help determine the appropriate size of a water heater for your home. Keep track of your daily usage of hot water to ensure the water heater is properly sized for your home.
  • Fuel Type – Most water heaters are powered by electricity. Less common models are powered by solar, natural gas, geothermal energy, propane, and fuel oil.
  • Energy Efficiency – Most modern water heaters operate efficiently. The top brands utilize less energy which equals more cost savings.
]]> How To Install A Dishwasher The Definitive Guide https://www.topplumbernyc.com/how-to-install-a-dishwasher-the-definitive-guide/ Mon, 13 Feb 2023 18:46:41 +0000 https://www.topplumbernyc.com/?p=20579 Read more]]>
Having a dishwasher will make your life so much easier since you won’t have to wash your dishes by hand. However, it can be difficult to install a new dishwasher. Many people will buy a dishwasher and hire a professional to install the new appliance. Although this is one option, you can save money by doing it yourself. With the right know-how, you can possibly install your new dishwasher within four hours. A&E NYC Plumbing When you’re ready to begin, follow the guide below to get your new dishwasher installed properly.

Get Rid Of The Old Dishwasher

If you have an old dishwasher, you’ll have to get rid of it before installing the new one. Truthfully, this will be the easiest step of the process. The only hard thing will be finding a suitable disposal method. Remember that your old dishwasher is connected to a water and electricity supply. Therefore, you’ll have to turn off both to avoid getting electrocuted and creating a mess. Turn off the electricity at the circuit breaker. There should be a water shut-off valve near the dishwasher. Turn it off. Once you’ve done this, you’ll need to remove the dishwasher’s front access panel using a screwdriver. Then, you can disconnect the wiring and the old water supply. Use a rag or bowl to catch the remaining water. The dishwasher is likely anchored to the nearby cabinets and the countertop. Get rid of these screws so you can remove the dishwasher from the designated slot. Before installing the new model, it is wise to get rid of the old one. You don’t want to have to do this later.

Prepare The New Dishwasher

Get assistance from a friend or two so you can bring in the new dishwasher without dropping it or damaging your home. Unpack the dishwasher and look at the instruction manual. Although the installation process is similar, there might be a difference or two between each unique model. Keep a piece of cardboard so you can protect your floor when sliding the new dishwasher into the hole. Lay the dishwasher on its side so you can access the wires easily. Unscrew the screws holding the front access door. The installation kit should come with a 90-degree elbow. Attach it now. You’ve likely received a new water supply valve and hose. The old supply line should be removed. Install the new one so it can be connected easily. Route it through the cabinet. You may need to use tape to hold the hose in place. Remove the old drain line and route the new one through the adjacent cabinet. The drain house should have a slope to prevent backwash.

Connecting The Lines

Once you’ve finished the steps above, it is time to push the dishwasher into place. You’re going to have limited space so it’ll be hard to connect the lines. Still, you’ll need to connect the water line, drain line, and electric cables. Remember to leave the electricity and water off until these things are connected. The water supply should be attached to the elbow. Check each connection carefully to ensure that you’re not going to encounter any leaks. Once you’ve finished with the water supply, you’ll need to connect the drain and electrical wires. You’ll also need to level the unit using a bubble level. You can raise one side or the other by using the legs at the bottom of the dishwasher. After you’ve double-checked everything and made sure that the dishwasher is level, you can install the front access panel. Be sure that the front of the dishwasher is even with the cabinets. Working with electricity can be risky unless you know exactly what you’re doing. Therefore, it might be a good idea to hire a professional. Turn on the electricity and water supply. Check the dishwasher and make sure everything is working properly. If you need assistance or if something is wrong, hire a professional to diagnose and fix the problem.
]]> How To Fix A Leaking Toilet https://www.topplumbernyc.com/how-to-fix-a-leaking-toilet/ Mon, 13 Feb 2023 18:42:34 +0000 https://www.topplumbernyc.com/?p=20569 Read more]]>
A leaking toilet can quickly cause your water bill to increase. Before you know it, your bill will double and possibly even triple. Suffice to say, this is something you’ll need to address promptly to avoid overspending. You also have to worry about water damaging your bathroom. Depending on the issue, you may be able to fix the leaking toilet on your own. A&E NYC Plumbing Try the step below before calling a professional.

The Toilet Is Running

In some cases, the toilet is constantly running. The tank will continue to fill because water is entering the bowl. Although it seems like a small issue, this type of leak can cause your bill to double before you know it. The toilet may run constantly due to several problems. For instance, you will need to check the chain between the arm and the flapper. It could be stuck or twisted. If the chain is fine, be sure to check the flapper valve because it might be leaking. It might let water pass through and enter the bowl. As this happens, the tank will constantly add more water. The valve may need to be replaced. Finally, the float may be stuck. Since it is stuck, it will never trigger the fill valve and stop water from entering the tank.

Checking The Chain

It is common for the chain to get stuck so this could be the reason your toilet is leaking. If it is stuck, the flapper likely isn’t sealing properly. You can fix this issue easily without hiring a professional. Start by turning off the water supply to the toilet. Once you’ve done that, you will need to fix the chain. It may need to be untangled. Disconnect the chain from the arm and fix it. Then, you can connect it back to the flusher arm. Turn on the water supply and check the toilet. If everything is working correctly, you’re successfully fixed the problem.

Inspecting The Flapper

The toilet flapper might be the source of the problem. You can easily find a replacement flapper and replace it within minutes. After you’ve turned off the water supply, remove the lid and look for the red flapper in the tank. Remove the chain. Disconnect the arms that are connected to the fill valve. Then, you should be able to remove the old flapper. Install the new one and reconnect the rubber arms. Install the chain again. Turn on the water supply and test the system to ensure the leak has stopped.

The Fill Valve

The float cup may be getting stuck. If this happens, the fill valve will never be triggered so the water flow to the tank will never stop. Although you might be able to temporarily fix the issue, it is generally best to replace the fill valve. Then, you won’t have to worry about experiencing this problem for a while. Start by turning off the water supply and disconnecting the supply hose. The chain must be disconnected from the flusher arm and the clip for the hose should be removed. You may need to use a pair of pliers to remove the plastic nuts. Once the nut has been removed, you should be able to lift out the fill valve so it can be replaced. When installing the new one, be sure to read the manufacturer’s manual carefully because each model is different. Once it has been installed, you must reconnect the remaining components. Turn on the water supply and check for leaks. When you flush the toilet, the fill valve should lift and stop the toilet from adding water once the desired level is reached.

Leaking Tank

It is common for toilet tanks to develop leaks after repeated use. The seals will stop working correctly so water will leak from the bottom of the tank. Ultimately, this issue has to be fixed quickly because it will lead to higher water bills and damaged floors. As long as you’re not dealing with a damaged tank, you can likely fix the problem easily. Turn off the supply and disconnect the supply hose. After opening the tank, disconnect the chain and flapper so you can remove the remaining water from the tank. You may need to soak up the water using a towel or rag to avoid making a mess. Then, you’ll need to remove the bolts holding the tank to the toilet. You’ll need a pair of pliers and a screwdriver. Once the bolts are removed, you should be able to lift the tank from the toilet. Carefully clear the portion of the toilet where the seal is installed. Install the new toilet seal. Carefully place the tank back onto the toilet and secure it with the screws. Install the remaining components again. After that, you should turn on the water supply and place a towel under the toilet to check for leaks. If everything is fine, you’ve successfully fixed your leaky toilet tank.
]]> How To Drain A Water Heater https://www.topplumbernyc.com/how-to-drain-a-water-heater/ Mon, 13 Feb 2023 18:37:26 +0000 https://www.topplumbernyc.com/?p=20562 Read more]]>
Water heaters have not only grown into an essential component of the modern household. The appliance also advanced to the point where its capabilities are truly astonishing. There is no better definitive proof than the modern advancement of technology. A&E NYC Plumbing Tankless water heaters are just one of the many prime examples. Although these appliances are well past the trial-and-error stages of production, installation, and marketing, they are still rather expensive. This is especially the case when compared to the relic tank designs. Both tank and tankless designs are mechanical systems that will arrive at points when they need servicing. While the biggest difference between the two designs is right there in the name. It is also one of the biggest distinctions in repair, maintenance, and installation. Despite the dependability and lower price tag of the tank designs, many of the eventual required repairs and maintenance tasks will require the draining of that tank. Luckily, this is something that can be easily accomplished with a little bit of know-how and a garden hose.

Locating The Appliance, Power Source, And Water Main

The difficulty of draining a water heater will ultimately come down to several key factors. The location and provided access will probably be the biggest hurdle, but there is also access to both the water and power supply to consider as well. Locating the appliance is the first hurdle. In the best possible scenarios, these appliances are located in a bathroom closet, next to the shower or toilet. These types of configurations will without a doubt make the job much easier. A water heater in the garage or stand-up basement will also reduce the difficulty of the task. The job will be even easier if there are water and power cutoffs located near the appliance. Depending on how far the appliance is from the water and electric mains, some installers will wire in a switch and water cutoffs If there are no water cutoffs or an electric switch, this task will likely require accessing the mains. Either way, shutting down the power and water is the first step. It’s not only for safety purposes, but not shutting the power could lead to shorts, grounds, and burned-up electrical elements. It is electrical elements internally installed that heat your water to a specific temperature. Much like a thermostat, when the water drops below that temperature those elements will heat the water until it reaches the set temperature. If these elements come on without water in the tank, it will cause them to burn out. Closing the water valves, on the other, will prevent more water refilling in the tank. Just like the temperature sensor, the tank also contains a water level and will want to automatically fill when it reaches the set water level. So, to reiterate, locating and shutting down the water and power is the first step. If you are lucky, everything you need to accomplish this will be located right there at the water heater. If you are unluckier, you’ll likely need to access both the water main and the main electric junction box.

Connecting Your Garden Hose

The length of your garden hose will depend on where you are draining the water as well as where the water heater is located. If the appliance is in the garage or stand-up basement, you can simply drain it outside or to a nearby drain. Other installation configurations might require draining in a sink, bathtub, or out the window. While you are locating the water heater and accessing water and electrical shut-offs, you can make the process easier by also noting the water heater’s drain outlet. This outlet is always situated on the bottom to maximize draining capabilities. An additional perk of using a garden hose is, the male end will thread right into the outlet. You can even go ahead and attach the hose and run the other end to an appropriate draining location. Do not open the drain valve until both the power and water are shut off to the appliance. Once the hot and cold water is shut off along with the power, you can open the valve. The water from the tank should drain through the hose. The time it takes to complete this step will vary depending on the size and location of the appliance. It shouldn’t take more than 15 or 20 minutes. If after that time water is still coming through the hose at a rapid rate, it might be possible that you haven’t properly shut the water supply down or the valve is malfunctioning.
]]>